previous arrow
next arrow
Slider

Envirocool®

A beautiful roof that saves you money – no wood shake can do that.

We enhanced our superior proprietary formulation with inorganic reflective pigments to create a highly engineered cool roof product with Enviroshake’s unmatched quality and benefits: Envirocool. 

What is Cool Roofing?

Cool roofing defines a material with enhanced properties that allow it to reflect and emit the sun’s radiation back toward the sky instead of transferring the heat into your house. The coolness of a product is measured by the Solar Reflectivity Index (SRI), which measures solar and thermal emittance. To be considered a cool roof, a product must have an SRI greater than 19. The higher the value, the cooler the roof. Enviroshake's signature  roofing product Envirocool, has an SRI value of 31. If you are looking for even greater reflectivity, choose our custom colour Bermuda White, for an impressive SRI of 80.9.  
Big benefit white on white. House stays much cooler (we could say ‘cold’) all year so far. Have to keep socks on when walking on the tile floors. Our solar setup allows us to run AC 24//7 and our last 3 bills have been under $100 (2 were under $80) so that’s unheard of around here. Enviroshake white slate with Icynene insulation, two great Canadian products both help out tremendously!Andrew Stirling, PlanItBahamas, Bahamas
Enviroshake roofing tiles are rated independently by the Cool Roof Rating Council (CRRC).    

Product Profile

TROPICAL SILVER

SILVERED CEDAR

AGED CEDAR

Envirocool® technology can also be added to our classic Silvered Cedar, Aged Cedar and Tropical Silver colours.

Get inspired

Try our visualization tool to experience how different colours and Enviroshake products can enhance your home’s aesthetic. Start by either uploading a photo of your own home or choosing a home with a similar exterior to yours and start making your dreams a reality.

Superior composite blend

  • Created using a composite material, reinforced by natural fibres & elastomers
  • Best-in-class UV Inhibitor technology allows for lasting colour
  • Requires no pre-treatments or preservatives
  • Installs with less waste than natural wood shakes
  • Unconditional Class A ASTM E108 fire-rated product available, suitable for use in high-risk fire zones
  • Limited lifetime warranty offered

Unsurpassed performance

  • Miami Dade-tested wind resistance of 180 mph (290 km/h)
  • Class 4 UL 2218 impact rating
  • Maintenance-free
  • Not damaged by hail, falling debris or from being walked upon
  • Does not crack, peel, warp or chip
  • Not damaged by salt spray
  • Resistant to mold, mildew, algae, and insect damage

Environmentally friendly

  • Made from 95% sustainable materials
  • 100% recyclable
  • Water runoff is potable

Installation

A quality product deserves a quality installation. Enviroshake products must be installed by a Factory Trained Installer for the warranty to be valid. If you are interested in becoming a Factory Trained Installer Click Here. Key Enviroshake installation tips:
  1. Ensure there is a minimum gap of 3/8" between each tile
  2. Install four nails per tile, one in each marked nailing area
  3. Use the Enviroshield synthetic underlayment to qualify for a Gold-Level Warranty
  4. Enviroshake installs with up to 40% less labour than a natural cedar shake roof!
Is your property in an environment that experiences snow fall? If so, Enviroshake highly recommends installing snow guards, as they can protect your property from damage caused by sliding snow and ice. For more information on snow guards, see our accessories tab.

Frequently Asked Questions

See our frequently asked installation questions or contact us  to speak with an Enviroshake representative to assist with any of your installation questions. 

Documents

Enviroshake installation guide
Enviroshake installation guide (Spanish)
Enviroshake installation guide (French)
Dos and Don'ts
Enviroshake Factory Training Process
Enviroshield Synthetic Underlayment
Enviroshake vs Cedar labour savings
Snow Guard Layout
Low Slope installation Guide

Warranty

At Enviroshake, we offer premium engineered products that we believe in. Because we stand behind
our products and want to provide long-lasting peace of mind to our customers, we offer simple fully
transferable limited lifetime warranties.
 

To qualify for our Gold-Level Warranty, your roof will need to be installed by a Factory Trained
Contractor and the Enviroshield® synthetic underlayment must be used.
 

Warranty Registration Link

Documents

Limited Lifetime Warranty

Hip & Ridge tiles (one piece)

Custom formed hip and ridge tiles for every job from slopes 2/12 - 20/12.

Enviroshield Synthetic Underlayment

The underlayment is the most critical component in creating a waterproof barrier on your roofing deck. All Enviroshake® roofing systems require the use of the Enviroshield synthetic underlayment in order to qualify for our Gold-Level Warranty. Underlay Spec Sheet PDF Underlay Install Guide PDF


Snow Guards

Enviroshake proudly offers Alpine® Snow Guards as an accessory to your Enviroshake roofing system. Snow guards should be placed on all roof surfaces to protect against snow damage to the areas below. It is especially important to install snow guards above entryways, walkways, gathering areas, landscaping, parking, ground-mounted mechanicals, lower roofs, valleys, crickets, gutters, and roof vents. Snow guards are specifically designed to prevent entire roof loads of snow from avalanching all at once, which can cause serious damage to any structures, landscaping, vehicles, and people in the area of impact. PAD 10 Specification PAD 11 Specification Snow Guard Install Guide

Fasteners

Enviroshake recommends the use of Stainless Steel fasteners, especially in coastal areas. Enviroshake offers Stainless steel nails coiled or loose (304 or 316), as well as loose stainless steel screws.

For technical support or to speak with an Enviroshake roofing expert about your roofing project contact us.